Physical and Mental Workload Measurement at the Sterilizer Station Using HRR and DRAWS at Cot Girek Palm Oil Mill

Article Sidebar

Download
Published: Jul 17, 2026
DOI: https://doi.org/10.60083/jidt.vi0.744
Keywords:
Physical Workload, Mental Workload, Heart Rate Reserve, Defense Research Agency Workload Scale, Sterilizer Station

Main Article Content

Rendy Purba
Department of Industrial Engineering, Faculty of Engineering, Universitas Malikussaleh
Cut Ita Erliana
Department of Industrial Engineering, Faculty of Engineering, Universitas Malikussaleh
Amri
Department of Industrial Engineering, Faculty of Engineering, Universitas Malikussaleh

Abstract

Physical and mental workload are important factors affecting workers' performance. Excessive workload may cause fatigue, reduce concentration, and increase the risk of work-related errors. Therefore, workload assessment is necessary to determine workers' workload levels and provide appropriate improvement recommendations. PT Perkebunan Nusantara IV Regional VI Unit PKS Cot Girek is a palm oil mill that produces crude palm oil (CPO). The sterilizer station is one of the critical workstations where workers push lorries, pull wire ropes, manually open and close sterilizer doors, and monitor the sterilization process. This study aimed to measure physical workload using the Heart Rate Reserve (HRR) method, assess mental workload using the Defence Research Agency Workload Scale (DRAWS) method, and propose improvement recommendations. The results showed that the physical workload required improvement, with %HRR values of 40.48%, 30.98%, and 31.17% for Workers 1, 2, and 3, respectively. Mental workload was classified as overload, with DRAWS scores of 67.85%, 64.70%, and 63.45%, respectively. Improvement recommendations include increasing the number of workers, improving the sterilizer door mechanism, maintaining the capstan, repairing the lorry rail track, implementing job rotation, clarifying task allocation, providing operational training, and improving the lorry positioning system to enhance safety, productivity, and work efficiency.

Article Details

How to Cite
Purba, R., Erliana, C. I., & Amri. (2026). Physical and Mental Workload Measurement at the Sterilizer Station Using HRR and DRAWS at Cot Girek Palm Oil Mill. Jurnal Informasi Dan Teknologi, 1-10. https://doi.org/10.60083/jidt.vi0.744
Issue
2026, Vol. 8, No. 1
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

[1] N. L. Martalita, B. Robiani, S. Rohima, and A. Yulianita, “Indonesia’s Crude Palm Oil (CPO) Export Dynamics: A 2000–2024 Perspective,” J. Magister Ilmu Ekon. Universtas Palangka Raya GROWTH, vol. 11, no. 1, pp. 1–10, 2025, doi: 10.52300/grow.v11i1.21775.
[2] S. K. Dermoredjo et al., “The global sway of Indonesian palm oil: An export analysis,” J. Agric. Food Res., vol. 22, no. January, 2025, doi: 10.1016/j.jafr.2025.102064.
[3] M. S. Mahant and Y. U. Shukla, “Effects of Ergonomics Among Dentist Practitioners on Pain and Function - An Interventional Study,” Int. J. Res. Rev., vol. 9, no. November, pp. 356–361, 2022, doi: https://doi.org/10.52403/ijrr.20221148.
[4] S. Ghosh, A. Bagchi, D. Sen, and P. Bandyopadhyay, “Ergonomics: A bridge between fundamentals and applied research,” Indian J. Occup. Environ. Med., vol. 15, no. 1, pp. 14–17, 2011, doi: 10.4103/0019-5278.83000.
[5] Z. Arkouli, G. Michalos, G. Kokotinis, and S. Makris, “Worker-centered evaluation and redesign of manufacturing tasks for ergonomics improvement using axiomatic design principles,” CIRP J. Manuf. Sci. Technol., vol. 55, no. October 2021, pp. 188–209, 2024, doi: 10.1016/j.cirpj.2024.10.001.
[6] L. Longo, C. D. Wickens, P. A. Hancock, and G. M. Hancock, “Human Mental Workload: A Survey and a Novel Inclusive Definition,” Front. Psychol., vol. 13, no. June, pp. 1–26, 2022, doi: 10.3389/fpsyg.2022.883321.
[7] V. Nino, D. Claudio, and S. M. Monfort, “Evaluating the effect of perceived mental workload on work body postures,” Int. J. Ind. Ergon., vol. 93, no. August 2022, p. 103399, 2023, doi: 10.1016/j.ergon.2022.103399.
[8] A. Brunzini, M. Peruzzini, F. Grandi, R. K. Khamaisi, and M. Pellicciari, “A preliminary experimental study on the workers’ workload assessment to design industrial products and processes,” Appl. Sci., vol. 11, no. 24, 2021, doi: 10.3390/app112412066.
[9] A. Hotma Uli Tumanggor et al., “Reliability Analysis Of Fresh Fruit Fruits (Ffb) Sorting Workers With Human Error Assessment And Reduction Technique (HEART) Methods,” 2022. [Online]. Available: https://ojs.uniska-bjm.ac.id/index.php/jieom/index
[10] G. M. Vuelvas robles, J. C. Cano-gutiérrez, J. E. Olguín-tiznado, C. Camargo-wilson, J. A. López-barreras, and M. A. Cázares-manríquez, “Ergonomic and Psychosocial Risk Factors and Their Relationship with Productivity : A Bibliometric Analysis,” Safety, vol. 11, no. 3, p. 74, 2025, doi: https://doi.org/10.3390/safety11030074.
[11] P. P. Heng, H. M. Yusoff, and R. Hod, “Individual evaluation of fatigue at work to enhance the safety performance in the construction industry: A systematic review,” PLoS One, vol. 19, no. 2 February, pp. 1–26, 2024, doi: 10.1371/journal.pone.0287892.
[12] R. P. Ribeiro, M. H. P. Marziale, J. T. Martins, M. J. Q. Galdino, and P. H. V. Ribeiro, “Occupational stress among health workers of a university hospital,” Rev. Gaúcha Enferm., vol. 39, no. 0, p. e65127, 2018, doi: https://doi.org/10.1590/1983-1447.2018.65127.
[13] E. Charzyńska, A. Habibi Soola, N. Mozaffari, and A. Mirzaei, “Patterns of work-related stress and their predictors among emergency department nurses and emergency medical services staff in a time of crisis: a latent profile analysis,” BMC Nurs., vol. 22, no. 1, pp. 1–10, 2023, doi: 10.1186/s12912-023-01241-9.
[14] F. Hitoshi, “Impact of Work-Related Stress on Japanese Medical Professionals Employees’ Psychological Well-Being,” Int. J. Psychol., vol. 8, no. 1, pp. 12–22, 2023, doi: 10.47604/ijp.1886.
[15] M. Okuda, Y. Kawamoto, H. Tado, and Y. Fujita, “Heart Rate Monitoring for Physiological Workload in Forestry Work : A Scoping Review,” vol. 16 (3), p. 520, 2025, doi: Https://doi.org/10.3390/f16030520.
[16] S. Sammito, B. Thielmann, A. Klussmann, A. Deußen, K. M. Braumann, and I. Böckelmann, “Guideline for the application of heart rate and heart rate variability in occupational medicine and occupational health science,” J. Occup. Med. Toxicol., vol. 19, no. 1, pp. 1–29, 2024, doi: 10.1186/s12995-024-00414-9.
[17] R. Luthfian, R. Silalahi, D. M. Ikasari, and R. Septifani, “Beban Kerja Fisik Pekerja Pengolah Emping Jagung di UKM Sofia Kota Malang Physical Workload of Corn Processing Workers in SME Sofia Malang City,” Ind. J. Teknol. dan Manaj. Agroindustri, vol. 7, pp. 12–22, 2018, doi: https://doi.org/10.21776/ub.industria.2018.007.01.2.
[18] M. Dias et al., “Cardiovascular load assessment in the workplace: A systematic review,” Int. J. Ind. Ergon., vol. 96, no. May, 2023, doi: 10.1016/j.ergon.2023.103476.
[19] A. Sudiarno, I. Akbar, R. S. Dewi, A. Maryani, and D. S. Dewi, “Original Article Job Description Design Based on Business Process Mapping and Workload Analysis Using M-Fte and Draws,” Hum. Factors Ergon. J., vol. 2021, no. 1, pp. 9–13, 2021.
[20] H. A. Khoiri, W. Isnaini, and P. Cahyaningtyas, “Mental Workload Analysis of PMM Outbound Student Using Defence Research Agency Workload Scale ( DRAWS ) Method,” J. OPSI, vol. 15, no. 2, pp. 175–182, 2022, doi: https://doi.org/10.31315/opsi.v15i2.6937.
[21] D. Kurniawan, S. Akmal, and M. Sayuti, “Workload Measurement Using the Cardiovascular Load Method and Defense Research Agency Workload Scale,” Int. J. Eng. Sci. Inf. Technol., vol. 4, no. 4, pp. 181–186, 2024, doi: 10.52088/ijesty.v4i4.608.